Tessen MP - TMP-108A

The TMP-108A houses a lightweight 800W peak Class D output section designed to perform in either a portable or a fixed instillation application, either floor standing or mounted on a tripod.

These compact cabinets are designed for vertical or horizontal use (including stage monitor use), with rotatable horns to tailor dispersion to the application.

Stacked on a sub woofer, mounted on a pole, flown (using the factory fitted Penn-Elcom flying points) or at your feet as a high power monitor, the Tessen MP range is the ideal compact and flexible sound reinforcement solution for your live or install needs.

Overview

Easily portable, but discreetly styled for install. Tessen MP will fulfil your requirements.

Combine a pair with a TNS-112A sub and you have an incredibly compact but powerful full range system that would fit into any venue or car!

Specification

Product TypeActive 2 way Multi-Purpose PA system
Sensitivity (1W@1m)95dB
Max SPL (calc)118dB
ConnectionsJack and XLR combi input, XLR link output. All balanced.
ControlsVolume, preshape EQ switch
WooferHH HA-426D. 8" driver
Crossover3.2kHz
Cabinet15mm MDF
FinishHardwearing black spatter paint
Grilleheavy gauge steel with acoustic foam front
Handles1 x HH bar handle
Pole mount fitting35mm steel
Dimensions (HxWxD) (mm)435 x 260 x 240
Amplifier type300W
Power SupplyLightweight Switch Mode
Power RMS 200W
Power prog400W
Power Peak800W
Input Sensitivity0dBu Nominal (+6db Gain)
ProtectionComprehensive protection circuitry and clip free limiting
CoolingConvection via external heatsink
Frequency response (-3dB)65 - 18kHz
Frequency response (-10dB)55 - 20kHz
TweeterHH GS-506N 1" exit compression driver
Horn dispersion (H x V°) 90 x 60 (rotatable)
Xover Freq3.2kHz
Xover Type/Slope18dB/Octave Linkwitz-Reilly Active filters
Cabinet material15mm MDF
Cabinet taper (trap / wedge)50° (wedge angle)
FeetCustom recessed low profile HH rubber feet
Mounting Points Industry Standard Penn Elcom M10 x 12
Packed Weight14.30 Kg

Technologies

HH-pa-woofer.jpeg

PA woofers

Many aspects must be considered in PA woofer design: Is it for a sub or a front-of-house cab? If front-of-house, what compression driver will it be used with? What size and type of cabinet must it suit? How many drivers will be in the cab?
HH-tessen-speaker.jpeg

Tessen Range Speakers

All Tessen systems have cast frame, designed-for-purpose woofers with highly efficient ribbon wire coils, massive magnet structures and glass-fibre reinforced felted cones with long excursion surrounds.
HH-total-system-design.jpeg

Total System Design

Total System Design
HH-cabinet.jpeg

Cabinet Design

Good Engineers realise that you can’t create a perfect design on a computer

Front of House Cabs

The main PA facing the audience is the vital link between your talent and your audiences perception.

Active Front of House

HH Active front-of-house cabs use our proprietary Biamp electronics.

Downloads